Development boards
ESP32-DevKitC V4 · WROVER pinout
ESP32-WROVER
Open in the interactive atlas →See the pin map, choose functions and save a wiring plan.Türkçe
The same 38-pin DevKitC V4 headers with a WROVER module. GPIO6–11 serve flash; GPIO16/17 are also reserved for internal memory and cannot enter a normal wiring plan. Strapping, input-only and ADC2/Wi-Fi restrictions also apply.
At a glance
- Platform / manufacturer
- Espressif
- Type
- Development boards
- MCU
- ESP32
- Physical contacts
- 38
- GPIO
- 32 (8 reserved)
- I/O voltage
- 3.3 V I/O
- Interfaces (pin count)
- I²C (20) · SPI (24) · UART (24) · ADC (16) · DAC (2) · PWM (20) · CLOCK (2) · IRQ (24) · JTAG (4) · TOUCH (10)
- MCU / processor core
- 2 × Xtensa LX6 [a]
- Clock speed / maximum
- 240 MHz [a]
- Internal RAM / system RAM
- 520 KB SRAM + 16 KB RTC SRAM [a]
- Fixed ROM / boot ROM
- 448 KB ROM [a]
- Pin sources checked
- 2026-11-05
- Technical details reviewed
- 2026-11-14
All pins (38)
| Physical | Pin name | Type | Functions | Notes and warnings | Source |
|---|---|---|---|---|---|
| J2.1 | 3V3 | Power | — | — | [1] [2] |
| J2.2 | EN | System | — | CHIP_PU/EN reset-enable input, not a normal GPIO. Shared with the board's reset circuit. | [1] [2] |
| J2.3 | GPIO36Board label VP | General-purpose I/O | ADC1_CH0UART1 RX (matrix) GPIO matrixSPI2 MISO (matrix) GPIO matrixGPIO interrupt | Input only Input only, with no output/PWM driver or internal pull-up/down. Provide external bias resistors when needed. Matrix input functions remain input-only. | [1] [2] |
| J2.4 | GPIO39Board label VN | General-purpose I/O | ADC1_CH3UART1 RX (matrix) GPIO matrixSPI2 MISO (matrix) GPIO matrixGPIO interrupt | Input only Input only, with no output/PWM driver or internal pull-up/down. Provide external bias resistors when needed. Matrix input functions remain input-only. | [1] [2] |
| J2.5 | GPIO34Board label IO34 | General-purpose I/O | ADC1_CH6UART1 RX (matrix) GPIO matrixSPI2 MISO (matrix) GPIO matrixGPIO interrupt | Input only Input only, with no output/PWM driver or internal pull-up/down. Provide external bias resistors when needed. Matrix input functions remain input-only. | [1] [2] |
| J2.6 | GPIO35Board label IO35 | General-purpose I/O | ADC1_CH7UART1 RX (matrix) GPIO matrixSPI2 MISO (matrix) GPIO matrixGPIO interrupt | Input only Input only, with no output/PWM driver or internal pull-up/down. Provide external bias resistors when needed. Matrix input functions remain input-only. | [1] [2] |
| J2.7 | GPIO32Board label IO32 | General-purpose I/O | ADC1_CH4TOUCH_CH9XTAL_32K_PUART1 RX (matrix) GPIO matrixSPI2 MISO (matrix) GPIO matrixUART1 TX (matrix) GPIO matrixSPI2 MOSI (matrix) GPIO matrixSPI2 SCK (matrix) GPIO matrixSPI2 CS (matrix) GPIO matrixI2C0 SDA (matrix) GPIO matrixI2C0 SCL (matrix) GPIO matrixLEDC PWM (matrix) GPIO matrixGPIO interrupt | — | [1] [2] |
| J2.8 | GPIO33Board label IO33 | General-purpose I/O | ADC1_CH5TOUCH_CH8XTAL_32K_NUART1 RX (matrix) GPIO matrixSPI2 MISO (matrix) GPIO matrixUART1 TX (matrix) GPIO matrixSPI2 MOSI (matrix) GPIO matrixSPI2 SCK (matrix) GPIO matrixSPI2 CS (matrix) GPIO matrixI2C0 SDA (matrix) GPIO matrixI2C0 SCL (matrix) GPIO matrixLEDC PWM (matrix) GPIO matrixGPIO interrupt | — | [1] [2] |
| J2.9 | GPIO25Board label IO25 | General-purpose I/O | ADC2_CH8DAC_1UART1 RX (matrix) GPIO matrixSPI2 MISO (matrix) GPIO matrixUART1 TX (matrix) GPIO matrixSPI2 MOSI (matrix) GPIO matrixSPI2 SCK (matrix) GPIO matrixSPI2 CS (matrix) GPIO matrixI2C0 SDA (matrix) GPIO matrixI2C0 SCL (matrix) GPIO matrixLEDC PWM (matrix) GPIO matrixGPIO interrupt | ADC2 availability depends on the chip, Wi-Fi and driver mode. Classic ESP32 shares ADC2 with Wi-Fi; check the ADC modes supported by your target SDK. | [1] [2] |
| J2.10 | GPIO26Board label IO26 | General-purpose I/O | ADC2_CH9DAC_2UART1 RX (matrix) GPIO matrixSPI2 MISO (matrix) GPIO matrixUART1 TX (matrix) GPIO matrixSPI2 MOSI (matrix) GPIO matrixSPI2 SCK (matrix) GPIO matrixSPI2 CS (matrix) GPIO matrixI2C0 SDA (matrix) GPIO matrixI2C0 SCL (matrix) GPIO matrixLEDC PWM (matrix) GPIO matrixGPIO interrupt | ADC2 availability depends on the chip, Wi-Fi and driver mode. Classic ESP32 shares ADC2 with Wi-Fi; check the ADC modes supported by your target SDK. | [1] [2] |
| J2.11 | GPIO27Board label IO27 | General-purpose I/O | ADC2_CH7TOUCH_CH7UART1 RX (matrix) GPIO matrixSPI2 MISO (matrix) GPIO matrixUART1 TX (matrix) GPIO matrixSPI2 MOSI (matrix) GPIO matrixSPI2 SCK (matrix) GPIO matrixSPI2 CS (matrix) GPIO matrixI2C0 SDA (matrix) GPIO matrixI2C0 SCL (matrix) GPIO matrixLEDC PWM (matrix) GPIO matrixGPIO interrupt | ADC2 availability depends on the chip, Wi-Fi and driver mode. Classic ESP32 shares ADC2 with Wi-Fi; check the ADC modes supported by your target SDK. | [1] [2] |
| J2.12 | GPIO14Board label IO14 | General-purpose I/O | ADC2_CH6TOUCH_CH6MTMSUART1 RX (matrix) GPIO matrixSPI2 MISO (matrix) GPIO matrixUART1 TX (matrix) GPIO matrixSPI2 MOSI (matrix) GPIO matrixSPI2 SCK (matrix) GPIO matrixSPI2 CS (matrix) GPIO matrixI2C0 SDA (matrix) GPIO matrixI2C0 SCL (matrix) GPIO matrixLEDC PWM (matrix) GPIO matrixGPIO interrupt | ADC2 availability depends on the chip, Wi-Fi and driver mode. Classic ESP32 shares ADC2 with Wi-Fi; check the ADC modes supported by your target SDK. | [1] [2] |
| J2.13 | GPIO12Board label IO12 | General-purpose I/O | ADC2_CH5TOUCH_CH5MTDIUART1 RX (matrix) GPIO matrixSPI2 MISO (matrix) GPIO matrixUART1 TX (matrix) GPIO matrixSPI2 MOSI (matrix) GPIO matrixSPI2 SCK (matrix) GPIO matrixSPI2 CS (matrix) GPIO matrixI2C0 SDA (matrix) GPIO matrixI2C0 SCL (matrix) GPIO matrixLEDC PWM (matrix) GPIO matrixGPIO interrupt | ADC2 availability depends on the chip, Wi-Fi and driver mode. Classic ESP32 shares ADC2 with Wi-Fi; check the ADC modes supported by your target SDK. Strapping pin: its reset-time level affects boot or hardware configuration. Check that external circuitry preserves the required reset levels. | [1] [2] [3] |
| J2.14 | GND | Ground | — | — | [1] [2] |
| J2.15 | GPIO13Board label IO13 | General-purpose I/O | ADC2_CH4TOUCH_CH4MTCKUART1 RX (matrix) GPIO matrixSPI2 MISO (matrix) GPIO matrixUART1 TX (matrix) GPIO matrixSPI2 MOSI (matrix) GPIO matrixSPI2 SCK (matrix) GPIO matrixSPI2 CS (matrix) GPIO matrixI2C0 SDA (matrix) GPIO matrixI2C0 SCL (matrix) GPIO matrixLEDC PWM (matrix) GPIO matrixGPIO interrupt | ADC2 availability depends on the chip, Wi-Fi and driver mode. Classic ESP32 shares ADC2 with Wi-Fi; check the ADC modes supported by your target SDK. | [1] [2] |
| J2.16 | GPIO9Board label D2 | General-purpose I/O | — | Unavailable in this reference Connected to the module's SPI flash. Do not use as normal GPIO; this contact is excluded from wiring plans. | [1] [2] |
| J2.17 | GPIO10Board label D3 | General-purpose I/O | — | Unavailable in this reference Connected to the module's SPI flash. Do not use as normal GPIO; this contact is excluded from wiring plans. | [1] [2] |
| J2.18 | GPIO11Board label CMD | General-purpose I/O | — | Unavailable in this reference Connected to the module's SPI flash. Do not use as normal GPIO; this contact is excluded from wiring plans. | [1] [2] |
| J2.19 | 5V | Power | — | — | [1] [2] |
| J3.1 | GND | Ground | — | — | [1] [2] |
| J3.2 | GPIO23Board label IO23 | General-purpose I/O | UART1 RX (matrix) GPIO matrixSPI2 MISO (matrix) GPIO matrixUART1 TX (matrix) GPIO matrixSPI2 MOSI (matrix) GPIO matrixSPI2 SCK (matrix) GPIO matrixSPI2 CS (matrix) GPIO matrixI2C0 SDA (matrix) GPIO matrixI2C0 SCL (matrix) GPIO matrixLEDC PWM (matrix) GPIO matrixGPIO interrupt | — | [1] [2] |
| J3.3 | GPIO22Board label IO22 | General-purpose I/O | UART1 RX (matrix) GPIO matrixSPI2 MISO (matrix) GPIO matrixUART1 TX (matrix) GPIO matrixSPI2 MOSI (matrix) GPIO matrixSPI2 SCK (matrix) GPIO matrixSPI2 CS (matrix) GPIO matrixI2C0 SDA (matrix) GPIO matrixI2C0 SCL (matrix) GPIO matrixLEDC PWM (matrix) GPIO matrixGPIO interrupt | — | [1] [2] |
| J3.4 | GPIO1Board label TX | General-purpose I/O | U0TXDUART1 RX (matrix) GPIO matrixSPI2 MISO (matrix) GPIO matrixUART1 TX (matrix) GPIO matrixSPI2 MOSI (matrix) GPIO matrixSPI2 SCK (matrix) GPIO matrixSPI2 CS (matrix) GPIO matrixI2C0 SDA (matrix) GPIO matrixI2C0 SCL (matrix) GPIO matrixLEDC PWM (matrix) GPIO matrixGPIO interrupt | Shared with the board's USB-UART bridge. External drivers can affect the console and uploads. | [1] [2] |
| J3.5 | GPIO3Board label RX | General-purpose I/O | U0RXDUART1 RX (matrix) GPIO matrixSPI2 MISO (matrix) GPIO matrixUART1 TX (matrix) GPIO matrixSPI2 MOSI (matrix) GPIO matrixSPI2 SCK (matrix) GPIO matrixSPI2 CS (matrix) GPIO matrixI2C0 SDA (matrix) GPIO matrixI2C0 SCL (matrix) GPIO matrixLEDC PWM (matrix) GPIO matrixGPIO interrupt | Shared with the board's USB-UART bridge. External drivers can affect the console and uploads. | [1] [2] |
| J3.6 | GPIO21Board label IO21 | General-purpose I/O | UART1 RX (matrix) GPIO matrixSPI2 MISO (matrix) GPIO matrixUART1 TX (matrix) GPIO matrixSPI2 MOSI (matrix) GPIO matrixSPI2 SCK (matrix) GPIO matrixSPI2 CS (matrix) GPIO matrixI2C0 SDA (matrix) GPIO matrixI2C0 SCL (matrix) GPIO matrixLEDC PWM (matrix) GPIO matrixGPIO interrupt | — | [1] [2] |
| J3.7 | GND | Ground | — | — | [1] [2] |
| J3.8 | GPIO19Board label IO19 | General-purpose I/O | UART1 RX (matrix) GPIO matrixSPI2 MISO (matrix) GPIO matrixUART1 TX (matrix) GPIO matrixSPI2 MOSI (matrix) GPIO matrixSPI2 SCK (matrix) GPIO matrixSPI2 CS (matrix) GPIO matrixI2C0 SDA (matrix) GPIO matrixI2C0 SCL (matrix) GPIO matrixLEDC PWM (matrix) GPIO matrixGPIO interrupt | — | [1] [2] |
| J3.9 | GPIO18Board label IO18 | General-purpose I/O | UART1 RX (matrix) GPIO matrixSPI2 MISO (matrix) GPIO matrixUART1 TX (matrix) GPIO matrixSPI2 MOSI (matrix) GPIO matrixSPI2 SCK (matrix) GPIO matrixSPI2 CS (matrix) GPIO matrixI2C0 SDA (matrix) GPIO matrixI2C0 SCL (matrix) GPIO matrixLEDC PWM (matrix) GPIO matrixGPIO interrupt | — | [1] [2] |
| J3.10 | GPIO5Board label IO5 | General-purpose I/O | UART1 RX (matrix) GPIO matrixSPI2 MISO (matrix) GPIO matrixUART1 TX (matrix) GPIO matrixSPI2 MOSI (matrix) GPIO matrixSPI2 SCK (matrix) GPIO matrixSPI2 CS (matrix) GPIO matrixI2C0 SDA (matrix) GPIO matrixI2C0 SCL (matrix) GPIO matrixLEDC PWM (matrix) GPIO matrixGPIO interrupt | Strapping pin: its reset-time level affects boot or hardware configuration. Check that external circuitry preserves the required reset levels. | [1] [2] [3] |
| J3.11 | GPIO17Board label IO17 | General-purpose I/O | — | Unavailable in this reference Reserved for internal flash/PSRAM communication on the selected module. Do not use as normal GPIO; excluded from wiring plans. | [1] [2] |
| J3.12 | GPIO16Board label IO16 | General-purpose I/O | — | Unavailable in this reference Reserved for internal flash/PSRAM communication on the selected module. Do not use as normal GPIO; excluded from wiring plans. | [1] [2] |
| J3.13 | GPIO4Board label IO4 | General-purpose I/O | ADC2_CH0TOUCH_CH0UART1 RX (matrix) GPIO matrixSPI2 MISO (matrix) GPIO matrixUART1 TX (matrix) GPIO matrixSPI2 MOSI (matrix) GPIO matrixSPI2 SCK (matrix) GPIO matrixSPI2 CS (matrix) GPIO matrixI2C0 SDA (matrix) GPIO matrixI2C0 SCL (matrix) GPIO matrixLEDC PWM (matrix) GPIO matrixGPIO interrupt | ADC2 availability depends on the chip, Wi-Fi and driver mode. Classic ESP32 shares ADC2 with Wi-Fi; check the ADC modes supported by your target SDK. | [1] [2] |
| J3.14 | GPIO0Board label IO0 | General-purpose I/O | ADC2_CH1TOUCH_CH1UART1 RX (matrix) GPIO matrixSPI2 MISO (matrix) GPIO matrixUART1 TX (matrix) GPIO matrixSPI2 MOSI (matrix) GPIO matrixSPI2 SCK (matrix) GPIO matrixSPI2 CS (matrix) GPIO matrixI2C0 SDA (matrix) GPIO matrixI2C0 SCL (matrix) GPIO matrixLEDC PWM (matrix) GPIO matrixGPIO interrupt | ADC2 availability depends on the chip, Wi-Fi and driver mode. Classic ESP32 shares ADC2 with Wi-Fi; check the ADC modes supported by your target SDK. Strapping pin: its reset-time level affects boot or hardware configuration. Check that external circuitry preserves the required reset levels. | [1] [2] [3] |
| J3.15 | GPIO2Board label IO2 | General-purpose I/O | ADC2_CH2TOUCH_CH2UART1 RX (matrix) GPIO matrixSPI2 MISO (matrix) GPIO matrixUART1 TX (matrix) GPIO matrixSPI2 MOSI (matrix) GPIO matrixSPI2 SCK (matrix) GPIO matrixSPI2 CS (matrix) GPIO matrixI2C0 SDA (matrix) GPIO matrixI2C0 SCL (matrix) GPIO matrixLEDC PWM (matrix) GPIO matrixGPIO interrupt | ADC2 availability depends on the chip, Wi-Fi and driver mode. Classic ESP32 shares ADC2 with Wi-Fi; check the ADC modes supported by your target SDK. Strapping pin: its reset-time level affects boot or hardware configuration. Check that external circuitry preserves the required reset levels. | [1] [2] [3] |
| J3.16 | GPIO15Board label IO15 | General-purpose I/O | ADC2_CH3TOUCH_CH3MTDOUART1 RX (matrix) GPIO matrixSPI2 MISO (matrix) GPIO matrixUART1 TX (matrix) GPIO matrixSPI2 MOSI (matrix) GPIO matrixSPI2 SCK (matrix) GPIO matrixSPI2 CS (matrix) GPIO matrixI2C0 SDA (matrix) GPIO matrixI2C0 SCL (matrix) GPIO matrixLEDC PWM (matrix) GPIO matrixGPIO interrupt | ADC2 availability depends on the chip, Wi-Fi and driver mode. Classic ESP32 shares ADC2 with Wi-Fi; check the ADC modes supported by your target SDK. Strapping pin: its reset-time level affects boot or hardware configuration. Check that external circuitry preserves the required reset levels. | [1] [2] [3] |
| J3.17 | GPIO8Board label D1 | General-purpose I/O | — | Unavailable in this reference Connected to the module's SPI flash. Do not use as normal GPIO; this contact is excluded from wiring plans. | [1] [2] |
| J3.18 | GPIO7Board label D0 | General-purpose I/O | — | Unavailable in this reference Connected to the module's SPI flash. Do not use as normal GPIO; this contact is excluded from wiring plans. | [1] [2] |
| J3.19 | GPIO6Board label CLK | General-purpose I/O | — | Unavailable in this reference Connected to the module's SPI flash. Do not use as normal GPIO; this contact is excluded from wiring plans. | [1] [2] |
General usage notes
3.3 V I/O; do not apply 5 V. Matrix choices need SDK pin routing and peripheral configuration. I²C requires open-drain operation and suitable pull-ups.
Model-specific features and connection notes
Sources
Pin and warning references
- esp32-devkitc official user guideHeader Block · J2/J3 numbered rows and module-specific restrictions
- esp32-devkitc official front/pin-layout imageOfficial front/pin-layout image · USB at bottom, antenna at top; header numbers start at antenna end
- ESP32 series datasheet · PDF p. 22Boot configurations · strapping levels are sampled during reset
Technical sources (3)
- ESP32 series datasheetEspressif · Locked pin-source document; see sources/manifest.json for revision and SHA-256
- esp32-devkitc official user guideEspressif · Locked pin-source document; see sources/manifest.json for revision and SHA-256
- ESP32-DevKitC V4 schematicEspressif · Complete circuit from the matching official DevKit guide; design date is not first-sale date
Locked source documents
- esp32-devkitc official user guideEspressif · 5c06bf1835329d6525f316475f7218aab6acfe79
- esp32-devkitc official front/pin-layout imageEspressif · 5c06bf1835329d6525f316475f7218aab6acfe79
- ESP32 series datasheetEspressif · Snapshot reviewed 2026-11-04