Development boards
NVIDIA Jetson Orin Nano pinout
J12 · P3768 carrier · 40-pin expansion header
Open in the interactive atlas →See the pin map, choose functions and save a wiring plan.Türkçe
J12 on the NVIDIA carrier board; excludes the 260-pin module connector and third-party carrier boards. Signals use 3.3 V levels. Peripherals require Jetson-IO/pinmux configuration; this plan does not configure the device. Function names are carrier signals, not Linux bus numbers.
At a glance
- Platform / manufacturer
- NVIDIA
- Type
- Development boards
- MCU
- Tegra234
- Physical contacts
- 40
- GPIO
- 28
- I/O voltage
- 3.3 V I/O
- Interfaces (pin count)
- I²C (4) · SPI (10) · UART (4) · PWM (2) · CLOCK (3) · I2S (4)
- Pin sources checked
- 2026-11-15
- Technical details reviewed
- 2026-11-14
All pins (40)
| Physical | Pin name | Type | Functions | Notes and warnings | Source |
|---|---|---|---|---|---|
| 01 | 3V3 | Power | — | — | [1] [2] |
| 02 | 5V | Power | — | — | [1] [2] |
| 03 | I2C1_SDA | General-purpose I/O | I2C1_SDA | This I²C line connects directly to the SoC and is open-drain. NVIDIA lists ±2 mA maximum drive, with 2.2 kΩ pull-ups on pins 3/5 and 1.5 kΩ on pins 27/28. GPIO/SFIO use depends on pinmux configuration. Source: [3] | [1] [2] [3] |
| 04 | 5V | Power | — | — | [1] [2] |
| 05 | I2C1_SCL | General-purpose I/O | I2C1_SCL | This I²C line connects directly to the SoC and is open-drain. NVIDIA lists ±2 mA maximum drive, with 2.2 kΩ pull-ups on pins 3/5 and 1.5 kΩ on pins 27/28. GPIO/SFIO use depends on pinmux configuration. Source: [3] | [1] [2] [3] |
| 06 | GND | Ground | — | — | [1] [2] |
| 07 | GPIO09 | General-purpose I/O | Audio Primary Clock | This 3.3 V line passes through a TXB0108 level translator. NVIDIA lists weak drive (±20 µA); external pull-up/pull-down resistors must exceed 50 kΩ. Function availability depends on pinmux/Jetson-IO and software support; use an appropriate external driver for loads. Source: [3] | [1] [2] [3] |
| 08 | UART1_TXD | General-purpose I/O | UART1_TXD | This 3.3 V line passes through a TXB0108 level translator. NVIDIA lists weak drive (±20 µA); external pull-up/pull-down resistors must exceed 50 kΩ. Function availability depends on pinmux/Jetson-IO and software support; use an appropriate external driver for loads. Source: [3] | [1] [2] [3] |
| 09 | GND | Ground | — | — | [1] [2] |
| 10 | UART1_RXD | General-purpose I/O | UART1_RXD | This 3.3 V line passes through a TXB0108 level translator. NVIDIA lists weak drive (±20 µA); external pull-up/pull-down resistors must exceed 50 kΩ. Function availability depends on pinmux/Jetson-IO and software support; use an appropriate external driver for loads. Source: [3] | [1] [2] [3] |
| 11 | UART1_RTS* | General-purpose I/O | UART1_RTS* | This 3.3 V line passes through a TXB0108 level translator. NVIDIA lists weak drive (±20 µA); external pull-up/pull-down resistors must exceed 50 kΩ. Function availability depends on pinmux/Jetson-IO and software support; use an appropriate external driver for loads. Source: [3] | [1] [2] [3] |
| 12 | I2S0_SCLK | General-purpose I/O | I2S0_SCLK | This 3.3 V line passes through a TXB0108 level translator. NVIDIA lists weak drive (±20 µA); external pull-up/pull-down resistors must exceed 50 kΩ. Function availability depends on pinmux/Jetson-IO and software support; use an appropriate external driver for loads. Source: [3] | [1] [2] [3] |
| 13 | SPI1_SCK | General-purpose I/O | SPI1_SCK | This 3.3 V line passes through a TXB0108 level translator. NVIDIA lists weak drive (±20 µA); external pull-up/pull-down resistors must exceed 50 kΩ. Function availability depends on pinmux/Jetson-IO and software support; use an appropriate external driver for loads. Source: [3] | [1] [2] [3] |
| 14 | GND | Ground | — | — | [1] [2] |
| 15 | GPIO12 | General-purpose I/O | — | This 3.3 V line passes through a TXB0108 level translator. NVIDIA lists weak drive (±20 µA); external pull-up/pull-down resistors must exceed 50 kΩ. Function availability depends on pinmux/Jetson-IO and software support; use an appropriate external driver for loads. Source: [3] | [1] [2] [3] |
| 16 | SPI1_CS1* | General-purpose I/O | SPI1_CS1* | This 3.3 V line passes through a TXB0108 level translator. NVIDIA lists weak drive (±20 µA); external pull-up/pull-down resistors must exceed 50 kΩ. Function availability depends on pinmux/Jetson-IO and software support; use an appropriate external driver for loads. Source: [3] | [1] [2] [3] |
| 17 | 3V3 | Power | — | — | [1] [2] |
| 18 | SPI1_CS0* | General-purpose I/O | SPI1_CS0* | This 3.3 V line passes through a TXB0108 level translator. NVIDIA lists weak drive (±20 µA); external pull-up/pull-down resistors must exceed 50 kΩ. Function availability depends on pinmux/Jetson-IO and software support; use an appropriate external driver for loads. Source: [3] | [1] [2] [3] |
| 19 | SPI0_MOSI | General-purpose I/O | SPI0_MOSI | This 3.3 V line passes through a TXB0108 level translator. NVIDIA lists weak drive (±20 µA); external pull-up/pull-down resistors must exceed 50 kΩ. Function availability depends on pinmux/Jetson-IO and software support; use an appropriate external driver for loads. Source: [3] | [1] [2] [3] |
| 20 | GND | Ground | — | — | [1] [2] |
| 21 | SPI0_MISO | General-purpose I/O | SPI0_MISO | This 3.3 V line passes through a TXB0108 level translator. NVIDIA lists weak drive (±20 µA); external pull-up/pull-down resistors must exceed 50 kΩ. Function availability depends on pinmux/Jetson-IO and software support; use an appropriate external driver for loads. Source: [3] | [1] [2] [3] |
| 22 | SPI1_MISO | General-purpose I/O | SPI1_MISO | This 3.3 V line passes through a TXB0108 level translator. NVIDIA lists weak drive (±20 µA); external pull-up/pull-down resistors must exceed 50 kΩ. Function availability depends on pinmux/Jetson-IO and software support; use an appropriate external driver for loads. Source: [3] | [1] [2] [3] |
| 23 | SPI0_SCK | General-purpose I/O | SPI0_SCK | This 3.3 V line passes through a TXB0108 level translator. NVIDIA lists weak drive (±20 µA); external pull-up/pull-down resistors must exceed 50 kΩ. Function availability depends on pinmux/Jetson-IO and software support; use an appropriate external driver for loads. Source: [3] | [1] [2] [3] |
| 24 | SPI0_CS0* | General-purpose I/O | SPI0_CS0* | This 3.3 V line passes through a TXB0108 level translator. NVIDIA lists weak drive (±20 µA); external pull-up/pull-down resistors must exceed 50 kΩ. Function availability depends on pinmux/Jetson-IO and software support; use an appropriate external driver for loads. Source: [3] | [1] [2] [3] |
| 25 | GND | Ground | — | — | [1] [4] |
| 26 | SPI0_CS1* | General-purpose I/O | SPI0_CS1* | This 3.3 V line passes through a TXB0108 level translator. NVIDIA lists weak drive (±20 µA); external pull-up/pull-down resistors must exceed 50 kΩ. Function availability depends on pinmux/Jetson-IO and software support; use an appropriate external driver for loads. Source: [3] | [1] [4] [3] |
| 27 | I2C0_SDA | General-purpose I/O | I2C0_SDA | This I²C line connects directly to the SoC and is open-drain. NVIDIA lists ±2 mA maximum drive, with 2.2 kΩ pull-ups on pins 3/5 and 1.5 kΩ on pins 27/28. GPIO/SFIO use depends on pinmux configuration. Source: [3] | [1] [4] [3] |
| 28 | I2C0_SCL | General-purpose I/O | I2C0_SCL | This I²C line connects directly to the SoC and is open-drain. NVIDIA lists ±2 mA maximum drive, with 2.2 kΩ pull-ups on pins 3/5 and 1.5 kΩ on pins 27/28. GPIO/SFIO use depends on pinmux configuration. Source: [3] | [1] [4] [3] |
| 29 | GPIO01 | General-purpose I/O | General Purpose Clock #0 | This 3.3 V line passes through a TXB0108 level translator. NVIDIA lists weak drive (±20 µA); external pull-up/pull-down resistors must exceed 50 kΩ. Function availability depends on pinmux/Jetson-IO and software support; use an appropriate external driver for loads. Source: [3] | [1] [4] [3] |
| 30 | GND | Ground | — | — | [1] [4] |
| 31 | GPIO11 | General-purpose I/O | General Purpose Clock #1 | This 3.3 V line passes through a TXB0108 level translator. NVIDIA lists weak drive (±20 µA); external pull-up/pull-down resistors must exceed 50 kΩ. Function availability depends on pinmux/Jetson-IO and software support; use an appropriate external driver for loads. Source: [3] | [1] [4] [3] |
| 32 | GPIO07 | General-purpose I/O | PWM | This 3.3 V line passes through a TXB0108 level translator. NVIDIA lists weak drive (±20 µA); external pull-up/pull-down resistors must exceed 50 kΩ. Function availability depends on pinmux/Jetson-IO and software support; use an appropriate external driver for loads. Source: [3] | [1] [4] [3] |
| 33 | GPIO13 | General-purpose I/O | PWM | This 3.3 V line passes through a TXB0108 level translator. NVIDIA lists weak drive (±20 µA); external pull-up/pull-down resistors must exceed 50 kΩ. Function availability depends on pinmux/Jetson-IO and software support; use an appropriate external driver for loads. Source: [3] | [1] [4] [3] |
| 34 | GND | Ground | — | — | [1] [4] |
| 35 | I2S0_FS | General-purpose I/O | I2S0_FS | This 3.3 V line passes through a TXB0108 level translator. NVIDIA lists weak drive (±20 µA); external pull-up/pull-down resistors must exceed 50 kΩ. Function availability depends on pinmux/Jetson-IO and software support; use an appropriate external driver for loads. Source: [3] | [1] [4] [3] |
| 36 | UART1_CTS* | General-purpose I/O | UART1_CTS* | This 3.3 V line passes through a TXB0108 level translator. NVIDIA lists weak drive (±20 µA); external pull-up/pull-down resistors must exceed 50 kΩ. Function availability depends on pinmux/Jetson-IO and software support; use an appropriate external driver for loads. Source: [3] | [1] [4] [3] |
| 37 | SPI1_MOSI | General-purpose I/O | SPI1_MOSI | This 3.3 V line passes through a TXB0108 level translator. NVIDIA lists weak drive (±20 µA); external pull-up/pull-down resistors must exceed 50 kΩ. Function availability depends on pinmux/Jetson-IO and software support; use an appropriate external driver for loads. Source: [3] | [1] [4] [3] |
| 38 | I2S0_DIN | General-purpose I/O | I2S0_DIN | This 3.3 V line passes through a TXB0108 level translator. NVIDIA lists weak drive (±20 µA); external pull-up/pull-down resistors must exceed 50 kΩ. Function availability depends on pinmux/Jetson-IO and software support; use an appropriate external driver for loads. Source: [3] | [1] [4] [3] |
| 39 | GND | Ground | — | — | [1] [4] |
| 40 | I2S0_DOUT | General-purpose I/O | I2S0_DOUT | This 3.3 V line passes through a TXB0108 level translator. NVIDIA lists weak drive (±20 µA); external pull-up/pull-down resistors must exceed 50 kΩ. Function availability depends on pinmux/Jetson-IO and software support; use an appropriate external driver for loads. Source: [3] | [1] [4] [3] |
Model-specific features and connection notes
Sources
Pin and warning references
- Jetson Orin Nano Developer Kit Carrier Board Specification · PDF p. 25§3.3 · Figure 3-1 · all 40 J12 pin positions and carrier signal names
- Jetson Orin Nano Developer Kit Carrier Board Specification · PDF p. 26§3.3 · Table 3-3 · J12 physical pins, carrier signals and alternate functionality
- Jetson Orin Nano Developer Kit Carrier Board Specification · PDF p. 27Table 3-3 notes · 3.3V signals, open-drain I2C and TXB0108 level translators
- Jetson Orin Nano Developer Kit Carrier Board Specification · PDF p. 27§3.3 · Table 3-3 · J12 physical pins, carrier signals and alternate functionality
Technical sources (3)
- Jetson Orin Nano Super specificationsNVIDIA · Comparison table; JetPack upgrade and CPU clock
- Orin Nano Developer Kit hardware layoutNVIDIA · Developer kit and storage
- Jetson Orin Nano Developer Kit Carrier Board SpecificationNVIDIA · Locked pin-source document; see sources/manifest.json for revision and SHA-256
Locked source documents
- Jetson Orin Nano Developer Kit Carrier Board SpecificationNVIDIA · SP-11324-001_v1.3 · December 2024